The brake drums on my vin racer are getting very worn and are not offering much stopping power. Does anyone know of someone that is able to resize worn drums ,or of thicker brake linings that would renew the old brakes to their former powers. Any suggestions that will help will be greatly appreciated. No crackes about carrying an anchor please.
See you down Old Dusty,
P.A. Busick
Your might try Woody Graves in Flordia. 407-416-2021
//www.woodysvintagegp.com
P.A.
If you have plenty of lining left but the cam is at full throw, you can put a formed metal clip on the cam to widen it and give you more throw. I remember using them "back in the day", but I can't remember if they were a Hi-Point item or who actually made them up.
Paul
Paul Several guys here in the NW have used local friction suppliers to rebuild their brakes on their vintage bikes. The result is a better braking than even stock. The reason for this is because of a better brake lining material, the backing plate installed with the new linings are then Arched and third the drum is cleaned up to give a better braking surface. the cost is not much more than a new set of shoes provided by current vintage suppliers... You might be able to find a similar company near you. They are not a motorcycle dealer but deal only in braking materials but maybe willing to help you with your project. I have rode several bikes set up like this and the results are amazing....
Thom Green,Still crazy after all these years!
76' 250 MC5 (orginal owner)74'
250 hare scrambler (project bike)
Paul -
It sounds like your drum may be worn too much & this won't help - but - if there is any steel lining left - Like Pauls' suggestion above - we used to take a spare brake cam & put a little brass on it with a brazing rod, then file it down until the shoes fit just right.
We usually carry one stock & one brazed one with us for Huskies. They were notorious for running out of stopping power before the linings were worn out.
Best of luck
Clark
Thanks for all the input fellas.
I have tried welding the brake cam as well as adding a shim to the face of the cam contact area of the brake shoe. While this does help, it is not the answear to better braking. I think that the best way to go is with the new friction material and grinding the shoe to the new radius of the drum. Now all I need to do is come up with a supplier in my area (Cleveland, Ohio) that can do the work. I'm going to give the fellow in Fl.a call and see if he can be of any service.
See you down Old Dusty,
Paul
I have gotten intouch with Woody Graves.
He does indeed reline brake drums. For about $300. he will fit a new liner in your old drum and radius the shoes. He told me that you need to send the whole wheel assembly with backing plate. It is best to dismount the tire and remove sprocket to save shipping costs. Woody said the best way to ship is via US Mail service. Cut a couple of heavy cardboard pieces to fit wheel and wrap with plastic pull material. He said the turn around time was a couple of days.
I'll let you all know how it turns out.
See you down Old Dusty,
Paul
P.S. Dusty says hello to all you POGERS