Print Page - Steel Tanker Restoration complete

Title: Steel Tanker Restoration complete
Post by: Rob Phillips on September 14, 2009, 08:30:11 AM

I was given help on this 1970 125 project by this forum and thought I would show the results. Thanks for your help.

//http://www.huskyrestoration.com/bikes/PentonA.JPG
//http://www.huskyrestoration.com/bikes/PentonB.JPG

Rob Phillips
//http://www.huskyrestoration.com

Title: Steel Tanker Restoration complete
Post by: Dennis Jones on September 14, 2009, 08:40:39 AM

Outstanding

Dennis Jones

Title: Steel Tanker Restoration complete
Post by: dirtbike on September 14, 2009, 10:31:43 AM

Thanks for another inspiration injection!
And congratulations to a fine job.

Title: Steel Tanker Restoration complete
Post by: tvrc18 on September 16, 2009, 08:11:04 AM

That sure is purdy. Turned out really nice, great job.
Terry

Title: Steel Tanker Restoration complete
Post by: TGTech on September 16, 2009, 08:20:48 AM

Rob,

The bike looks very nice, but there should be some things changed based on my experiences of my '69 Berkshire.

The headlight mounts on the forks, should be lowered so the headlight could be pointed down more that aiming up.

The clutch cable needs to go behind the cylinder up to the frame under the tank, so it doesn't get grabbed by branches.

The throttle needs to be turned to the rear, so the throttle cable doesn't get grabbed by branches.

Thanks for posting the pictures.

Dane

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Rob Phillips on September 14, 2009, 08:30:11 AM