Print Page - 3 parts bikes

Title: 3 parts bikes
Post by: OUCWBOY on January 24, 2002, 02:07:44 PM

Hi all,
I just acquired 3 bikes for parts if anyone is in need of anything. One is a 1972 125 and one is a 1974 125 and the other is a 1975 250.
If anyone needs items off these bikes let me know. 1st come 1st served.
Donny
Donny

Title: 3 parts bikes
Post by: Dennis Jones on January 24, 2002, 03:20:46 PM

Donny,
Does the 74 125 have a front wheel? I could use one. Thanks

Dennis Jones

Title: 3 parts bikes
Post by: Rocket on January 24, 2002, 07:30:29 PM

Donny
I could use the air boot from the carb to the airbox and the thin clamps. I would like 2 sets, 125 and 250. Do you have a good stock pipe for a 125?
thanks
Rocket

Title: 3 parts bikes
Post by: mikey on January 25, 2002, 04:07:45 PM

Quotequote:
Hi all,
I just acquired 3 bikes for parts if anyone is in need of anything. One is a 1972 125 and one is a 1974 125 and the other is a 1975 250.
If anyone needs items off these bikes let me know. 1st come 1st served.
Donny
Donny

Title: 3 parts bikes
Post by: mikey on January 25, 2002, 04:08:32 PM

Quotequote:
Hi all,
I just acquired 3 bikes for parts if anyone is in need of anything. One is a 1972 125 and one is a 1974 125 and the other is a 1975 250.
If anyone needs items off these bikes let me know. 1st come 1st served.
Donny
Donny

I am looking for a set of 35mm non -leading axle forks..not sure if thats whats on the 250 or not..let me know. tx

Title: 3 parts bikes
Post by: Mike Lenz on January 26, 2002, 09:42:16 PM

I am also looking for a set of 35 mm forks 7 inch ones. You can e mail me at [email protected]

Title: 3 parts bikes
Post by: ktmkirk on January 29, 2002, 06:05:34 PM

Donny, I could use some seat mounting tabs etc. or a complete seat

Title: 3 parts bikes
Post by: Tom Gougeon on January 29, 2002, 08:19:38 PM

I could use the chain guard and chain guide from the 250. Please email me at [email protected]

Thanx

Title: 3 parts bikes
Post by: czechmate on January 30, 2002, 10:04:30 AM

Donny, I'm looking for an air filter cage, shift lever, a core engine with no broken cylinder fins, and a Bing 36mm carb for my KTM 250. Thanks!

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: OUCWBOY on January 24, 2002, 02:07:44 PM