Text only | Text with Images

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Charles Gresham on November 11, 2009, 09:49:37 AM

Title: Fiber sleeve for 54 Bing / 74 Harescrambler
Post by: Charles Gresham on November 11, 2009, 09:49:37 AM
Anyone know where I could locate one ? They seem rare as hen's teeth :D
Title: Fiber sleeve for 54 Bing / 74 Harescrambler
Post by: Steve Minor on November 11, 2009, 10:04:32 AM
1. Have you contacted Bing directly?

2. Try this seller on eBay....it might be a lead.

http://cgi.ebay.com/ebaymotors/BING-NOS-Carburetor-Sleeve-Penton-Sachs-Tempo-Zundapp_W0QQcmdZViewItemQQhashZitem1c0dd55027QQitemZ120491167783QQptZMotorcyclesQ5fPartsQ5fAccessories

Steve Minor
Wilmington, NC
Title: Fiber sleeve for 54 Bing / 74 Harescrambler
Post by: tofriedel on November 11, 2009, 10:59:08 AM
Charles,

What size Bing fiber sleeve do you need?

Tony
Title: Fiber sleeve for 54 Bing / 74 Harescrambler
Post by: Charles Gresham on November 11, 2009, 04:07:28 PM
I need the size that mounts a Bing model 54 to the intake of the 1974 Penton 250cc Hare scrambler ( stock setup) ... I contacted NOS.. they dont have the large one.. just the smaller sleeve for 125's.... [V]
Title: Fiber sleeve for 54 Bing / 74 Harescrambler
Post by: Charles Gresham on November 11, 2009, 04:47:48 PM
Bing does not have them either ....
Title: Fiber sleeve for 54 Bing / 74 Harescrambler
Post by: sixdazed on November 11, 2009, 06:45:22 PM
Charles,I may have an extra-i'll look tonite for one.
                                                       Ric

ric emmal
Title: Fiber sleeve for 54 Bing / 74 Harescrambler
Post by: Charles Gresham on November 12, 2009, 09:54:50 AM
Thanks guys... it seems carbs other than the Bing are harder to dial in due to the angle the carb mounts, and resulting attitude of the fuel bowl / float. It will be cool to have the stock setup on the bike "vintage " :D I sure hope someone can scrounge on up [:p]
Title: Fiber sleeve for 54 Bing / 74 Harescrambler
Post by: slvrbrdfxr on November 12, 2009, 04:01:06 PM
Charles,
During the restoration on my 74 Harescrambler a few years ago I was unable to locate a new fiber sleeve. I ended applying a few wraps of teflon plumbers tape on the spigot and it's been to be fine so far.
Dave McCullough
Title: Fiber sleeve for 54 Bing / 74 Harescrambler
Post by: Larry Perkins on November 12, 2009, 07:05:14 PM
I have used a cross section of a smaller bicycle tube also.

Larry P
Title: Fiber sleeve for 54 Bing / 74 Harescrambler
Post by: sixdazed on November 17, 2009, 03:14:04 PM
Charles,Sorry i didn't get back to you sooner but i didn't have a spare carb sleeve (not even one i might consider usable).I only have 2 good ones and they are on my two 250's.Sorry.
                                             Ric

ric emmal
Title: Fiber sleeve for 54 Bing / 74 Harescrambler
Post by: garrettccovington on November 22, 2009, 09:59:02 PM
Check out this web site
http://www.4robs.com.au/KTM%20Penton%20Parts.htm

72 six-day
Title: Fiber sleeve for 54 Bing / 74 Harescrambler
Post by: G Ellis on November 22, 2009, 10:39:55 PM
Rob's operation cought fire last year. Later Gary
Title: Fiber sleeve for 54 Bing / 74 Harescrambler
Post by: Kip Kern on November 23, 2009, 06:56:03 AM
Make them out of Felpro gasket material.  They will flex, no holes in them, and you can get any thickness.  Available at finer auto parts stores;)
Title: Fiber sleeve for 54 Bing / 74 Harescrambler
Post by: Charles Gresham on November 23, 2009, 02:17:08 PM
Kip, that is what I had decided to do... thanks for looking everyone :)
Title: Fiber sleeve for 54 Bing / 74 Harescrambler
Post by: mxearl on November 23, 2009, 10:09:21 PM
Charles.  The fiber sleeve you need for a Bing 54.I have a sleeve i removed from a Bing 54  54/36/108. I checked another Bing 54 that i have 54/38/101 it has the same sleeve as the 36. These sleeves are not the thin fiber sleeves but looks like they are made from delrin material. The O.D. is 49mm and the I.D. is 45 mm, material is 23mm thick. The fiber sleeve is a lot thinner. I would send you one if you think it would work. I don't know why the sleeves are different somebody out there will.

mxearl



earl m dempsey
Text only | Text with Images