Text only | Text with Images

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Dale Fisher on November 15, 2009, 07:19:00 PM

Title: Spokes needed.
Post by: Dale Fisher on November 15, 2009, 07:19:00 PM
Week one into the winters project: Disassembly, cleanup, and oh spoke issues found.  74 CMF front wheel needs two spokes or nipples or both.  They will not tighten up, it looks like possibly a thread problem.  Rear wheel has one broken spoke and two that are mostly bent.  Need the following if someone can help.

2 - Front spokes (mine have a thicker portion at hub)
3 - Rear spokes
3 or 4 - spoke nipples (mine are not brass colored)

Dale Fisher
[email protected]
Title: Spokes needed.
Post by: Randy Kirkbride on November 15, 2009, 08:23:24 PM
Hi Dale,
I'm sure I can help you out. There are inside & outside spokes on the front & back hubs. Outside spokes have a sharper bend even though they are the same length. Which ones do you need?
Title: Spokes needed.
Post by: Dale Fisher on November 16, 2009, 07:16:42 AM
Randy,
The three rear are all inside, the fronts are one inside and one outside.

Thanks,
Dale Fisher
[email protected]
Title: Spokes needed.
Post by: Randy Kirkbride on November 16, 2009, 08:32:33 AM
Dale,
E-mail me your address & I'll send them out tomorrow.

[email protected]
Title: Spokes needed.
Post by: Randy Kirkbride on November 17, 2009, 09:16:45 AM
Dale,
I mailed out your front spokes this morning but wasn't able to locate any of the rear spokes that you need. Maybe someone else on here can help you out on those. Sorry.
Title: Spokes needed.
Post by: Dale Fisher on November 17, 2009, 10:10:18 AM
Randy had the front spokes I needed.  Anyone have 3 - rear inside spokes for a "74" magnesium barrel hub?

Dale Fisher
[email protected]
Text only | Text with Images