Print Page - 49.5 mm Sach Piston Kit

Title: 49.5 mm Sach Piston Kit
Post by: VICTOR MONZ on December 30, 2009, 12:14:15 AM

Maybe shooting in the dark....but thought I would try and ask if anyone could help me out with a 49.5 mm piston kit for a 72 100 cc aluminum barrel.

Have 48, 48.5 and 49 to trade...and even have a 100 cc barrel, aluminum without sleeve.

Victor

Title: 49.5 mm Sach Piston Kit
Post by: Dale Fisher on December 30, 2009, 06:27:08 AM

Victor, See this from recent post. He had them when I called.

ALSO have large qtys. of sachs 100 125cc original pistons all sizes.give me call 412 781 6309 or 412 999 1143 THANKS FOR LOOKING Jake,

Title: 49.5 mm Sach Piston Kit
Post by: sixdazed on December 30, 2009, 11:02:10 AM

Victor,I think Glen Adams from Texas bought all Jake's sachs piston kits.If you need his numbers they are (512)947-4536 or(512)398-4152.I'll look at home tonite and see if i have a 49.5 in case Glen doesn't have one.Take Care,
Ric

ric emmal

Title: 49.5 mm Sach Piston Kit
Post by: fosterboy on December 30, 2009, 11:19:54 AM

I have two brand new Sachs 49.5 pistons still in the box.ed

73 Monark 125

Title: 49.5 mm Sach Piston Kit
Post by: fosterboy on December 30, 2009, 11:50:05 AM

I take that back I have one 48.5 and one 49.5 I didn't have my specs on!

73 Monark 125

Title: 49.5 mm Sach Piston Kit
Post by: gooddirt on December 30, 2009, 07:21:14 PM

Make sure you guys have the alloy barrel type , with the top ring at the top edge of the piston dome. And they should have ridge lines around the the piston in the ring area. I had ordered the same and was sent the iron barrel type piston; with a high piston dome top that might hit the head inter dome . I could also use a 49.5. LG

Title: 49.5 mm Sach Piston Kit
Post by: VICTOR MONZ on December 30, 2009, 10:14:30 PM

Thanks for the quick response...Fosterboy (sorry I forget your first name) would you part with the 49.5 mm and as Larry states will it work for my alloy barrel ?

If so, please e-mail me at [email protected] and we could make the necessary arrangements.

I am tearing down the motor this weekend and it would be perfect timing to bore it and pop in the new piston.

I did contact Glenn, great guy, and he wasn't sure which part numbers are for iron barrels vs alloy barrels...maybe we could identify those differences....I am not that sharp on these issues.

Thank a million !

Victor

Title: 49.5 mm Sach Piston Kit
Post by: john durrill on December 31, 2009, 01:38:05 AM

Victor,
Iron barrel 100 piston assembly ( piston , rings and wrist pin + c clips) part# 's are
0686 208 005 Std 006 , 007, 008 ( 49.5 mm )
Aluminum cylinder 100 piston Assembly part #'s are,
0686 208 015 Std 016 , 017 , 018 ( 49.5 mm )
hope this helps,
john d.

Title: 49.5 mm Sach Piston Kit
Post by: fosterboy on December 31, 2009, 11:56:03 AM

Larry my box has no number but the piston has a red paint dot like the rest off the pistons I have and it has groves between the rings and below the lower ring.ed

73 Monark 125

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: VICTOR MONZ on December 30, 2009, 12:14:15 AM