Print Page - Metric Sized Airboot Hose Clamps???

Title: Metric Sized Airboot Hose Clamps???
Post by: DKWRACER on January 29, 2002, 07:52:16 PM

Has anyone been able to locate a source for the large clamp for the air-boot on early 70's Pentons,
Thanks,
Tom....

Title: Metric Sized Airboot Hose Clamps???
Post by: joeaw on January 29, 2002, 08:59:53 PM

racer- I have 4 of those clamps, but have sorta promised them to Larry Perkins. Maybe he will read this post and between us we can get you a clamp. joe

Title: Metric Sized Airboot Hose Clamps???
Post by: nsujeff on January 30, 2002, 07:28:53 PM

I used the clamps from a VW Rabbit etc. fuel injection boot. It is the right width unlike the American counterpart which is much to wide and slips off.A good foreign car parts store should have them.I got mine at Euclid Foreign Motors here in northern Ohio.

Jeffrey P. Borer

Title: Metric Sized Airboot Hose Clamps???
Post by: mikey on January 31, 2002, 06:06:05 PM

you don't have a part number do you..not all parts places will work with you unless you specify a make model or part number..tx..I am struggling with that big clamp to the air box too.

Quotequote:
I used the clamps from a VW Rabbit etc. fuel injection boot. It is the right width unlike the American counterpart which is much to wide and slips off.A good foreign car parts store should have them.I got mine at Euclid Foreign Motors here in northern Ohio.

Jeffrey P. Borer

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: DKWRACER on January 29, 2002, 07:52:16 PM