Print Page - Marzocchi

Title: Marzocchi
Post by: Mike Lenz on December 30, 2009, 06:38:14 PM

I am looking for a good marz 1/2 inch shaft, or shock(s) with good shaft.
Thanks!
Mike

Title: Marzocchi
Post by: Rocket on December 31, 2009, 12:19:08 AM

Mike
I have a pair of 12mm shocks rebuilt/restored, ready to go for $375. Springs, and spring keepers are powder coated, everything else blasted, painted and clear coated. spring keepers re-plated. I also have rebuild kits for the shocks that include new seals, shaft wipers, o-rings, screws and decals for $75 shipped.
Rocket

Title: Marzocchi
Post by: VICTOR MONZ on December 31, 2009, 07:30:39 AM

I have a pair of Marzzochi forks 32 mm off of an old 125 Indian MX'er...very nice condition.

Would let them go very reasonable if anyone has interest.

Victor

Title: Marzocchi
Post by: Lew Mayer on December 31, 2009, 09:12:27 AM

Victor, thanks for that info. I have a pair of 32 mm Zoke forks on a Penton Woodsman but I didn't have a clue what bike might have used them.

Lew Mayer

Title: Marzocchi
Post by: fosterboy on December 31, 2009, 12:02:41 PM

Mr.Rocket do you rebuild the 10mm shaft older Marzocchi shocks or do you have the seal kits for them? Price on both if you do. Thanks ed

73 Monark 125

Title: Marzocchi
Post by: Rocket on December 31, 2009, 02:59:05 PM

Fosterboy
Sent you an email.
Rod G

Title: Marzocchi
Post by: fosterboy on December 31, 2009, 04:27:07 PM

eddiestimach@yahoo

73 Monark 125

Title: Marzocchi
Post by: Mike Lenz on January 07, 2010, 09:27:07 PM

Thought Id post this again. Nobody with any shocks with a good 1/2" shaft?

Title: Marzocchi
Post by: gooddirt on January 08, 2010, 07:04:38 PM

I will see what I have in the back dark corner.

Title: Marzocchi
Post by: Charles Gresham on January 11, 2010, 11:39:45 AM

Where can you find new rubber mounting bushings for these shocks?

1974 Penton 250 Hare Scrambler
1973 Honda CL 100
1983 Honda XL 185
1993 Yamaha RT 180

Title: Marzocchi
Post by: brian kirby on January 11, 2010, 12:56:11 PM

Rod,

I'd like a rebuild kit, 12mm shafts.

[email protected]

Brian

'72 Berkshire

Title: Marzocchi
Post by: gooddirt on January 14, 2010, 03:48:56 PM

All mine are the smaller shaft.

Title: Marzocchi
Post by: Mike Lenz on January 15, 2010, 06:10:07 PM

Thanks anyway guys. If any pops up keep me in mind will ya.

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Mike Lenz on December 30, 2009, 06:38:14 PM