Text only | Text with Images

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Kip Kern on February 18, 2010, 11:28:38 AM

Title: Euro Rods
Post by: Kip Kern on February 18, 2010, 11:28:38 AM
Anyone heard from these folks lately, seems they fell of the earth.  Any other Con Rod jobbers out there for KTM/Sachs?
Title: Euro Rods
Post by: john durrill on February 21, 2010, 09:45:27 AM
Kip,
 Sorry for the delay in responding. They moved to Florida a few years back. They list a Rod for the Sachs engines. I did get my B engine rod from them for the Sachs 175 project. Al was out of rods at the time and Euro was working hard to find someone that would taper the big end pin in small lots of 50 or so at a time.
Here is their web page with the KTM / Penton rods listed.

( http://www.euro-rods.com/id2.html )

They were great folks to work with last time we contacted them.
john d.
Title: Euro Rods
Post by: Kip Kern on February 22, 2010, 07:03:10 AM
John  No luck contacting them for the last few weeks:(
Title: Euro Rods
Post by: gooddirt on February 23, 2010, 01:59:08 PM
They had made the rods kits for AL B as I understand.
Title: Euro Rods
Post by: Kip Kern on February 23, 2010, 02:44:33 PM
Forest finally got ahold of them, seems they were tied up with something.  Hopefully, we will see some more connecting rods headed our way!
Title: Euro Rods
Post by: gooddirt on February 23, 2010, 01:59:08 PM
They had made the rods kits for AL B as I understand.
Title: Euro Rods
Post by: Kip Kern on February 23, 2010, 02:44:33 PM
Forest finally got ahold of them, seems they were tied up with something.  Hopefully, we will see some more connecting rods headed our way!
Text only | Text with Images