Print Page - SHOCK BUSHINGS

Title: SHOCK BUSHINGS
Post by: Larry Perkins on July 16, 2010, 08:11:37 AM

Open to others ideas of how to make makeshift or better shock bushings for rear shocks. Thanks!

Larry P

Title: SHOCK BUSHINGS
Post by: chicagojerry on July 16, 2010, 09:15:09 AM

i just had some of these machined out of aluminum bar stock yesterday. i copied the ones that i got from the ohlins guys after i bought the shocks. my pentons have two different sizes. the top bolts are ten mm and the bottom eights. you have to get the O.D. turned down to the right dimension on the bar stock. i had a piece a few inches long machined down and then had the bar drilled and cut to length. chi jer

Title: SHOCK BUSHINGS
Post by: Larry Perkins on July 16, 2010, 09:21:13 AM

Jerry,

I am meaning the rubber part. I have the inner metal part.

Larry P

Title: SHOCK BUSHINGS
Post by: Mike Hufnagel on July 16, 2010, 09:42:46 AM

Polyurethane

Title: SHOCK BUSHINGS
Post by: Larry Perkins on July 16, 2010, 11:10:58 AM

Thanks Mike. I can do that one.

Larry P

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Larry Perkins on July 16, 2010, 08:11:37 AM