Text only | Text with Images

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: gary ponce on March 02, 2002, 10:35:43 AM

Title: needed parts
Post by: gary ponce on March 02, 2002, 10:35:43 AM
it appears that i have a 1974 250 penton mx frame that i am tring to locate a seat which i was told is a little longer than the piner and also was the gas tank smaller than the piner?  tank needed as well if anyone can help restoration is waiting. thanks!

gary ponce
Title: needed parts
Post by: metalkfab on March 02, 2002, 10:43:09 AM
Contact Al Buehner listed under Parts ,he'll help you out .
Title: needed parts
Post by: LINDEMAN on March 03, 2002, 10:14:17 AM
gary there are a couple tanks on e-bay one is mine, a rough red one and one new after market clear. I am going to sell a couple air box covers . Do you need the std. one or one with numberplate?Dave

 
Title: needed parts
Post by: gary ponce on March 03, 2002, 02:12:11 PM
Dave, looking for left and right side covers with numberplate, thanks.

gary ponce
Title: needed parts
Post by: LINDEMAN on March 03, 2002, 08:41:16 PM
Gary I know I have left sides but it will be wed. untill I can get back to you on it.If tou are going to ride this bike you might consider using the metal pipe gaurd and reg.plasic oval #plate.My right boot always tears theme up.They stick out to far and the fiberglass won,t flex enough to tuck in.Dave

 
Text only | Text with Images