The good news is that Chi Jerry has informed me my 72/73 Jackpiner 175 lower end is good, the cylinder has a crack below the exhaust port (but may be usable), and needs another piston. It currently is on the original bore so I am preferably looking for a new or very good used 64mm.
Also still looking for a set of good 32mm chrome fork tubes.
Al, if you have any word on your temporarily out of stock please let me know.
[email protected]1972 Cheney Sachs
1972 Suzuki GT380
1972/73 Cheney Sachs Project
1973 Triumph TR5MX
1973 Penton Jackpiner Project
1974 Penton Berkshire
1974 Honda MT125
Good Luck, tough to find. I needed the same and Al is currently out. I managed to find a decent used one and put new rings on it for rebore. Al does have a limited supply of the correct clutch plates for the 175 though. When they are gone, there are nomore unless someone makes new 3.4mm organic directional. No more KS shafts either so take care of those Piners![:0]
Dale,
I sent you a PM via email.
Ron Carbaugh