Print Page - Marzocchi shocks

Title: Marzocchi shocks
Post by: Rocket on March 11, 2002, 09:15:10 PM

I need the rubber cushions that are on the shock shafts for the 10mm and 12mm shocks or an idea what will work. I am talking about the anti-bottoming rubber that keeps the shock from bottoming to hard. Any ideas out there in Penton land??
Rocket

Title: Marzocchi shocks
Post by: Heinz Raidel on March 12, 2002, 04:34:38 PM

Rod:

I ordered bumpers from Fox last fall. They're black, long, shortenable, and work on the 12mm shafts. Mine were originally for the 17.5" Fox Factory Shox.
-HR

Title: Marzocchi shocks
Post by: Rocket on March 12, 2002, 07:11:10 PM

Thanks Heinz, I'll give that a try.

Title: Marzocchi shocks
Post by: tmc3c on March 25, 2002, 03:55:29 PM

Hey Rocket if you don't find what you need at fox try H&H KTM they are redoing a set of Marzocchi piggy back's that no one else could do.Talk to Barry.

Thomas Carmichael

Title: Marzocchi shocks
Post by: mad max on March 25, 2002, 05:53:18 PM

you could use a rubber door stop these are just about the right size all you need to do is enlarge the hole in the centre these are very cheap at any hardware store

Title: Marzocchi shocks
Post by: Rocket on March 25, 2002, 08:39:13 PM

I went to a Midas muffler and shock business and they had exactly what I needed.
thanks for the help,
Rocket

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Rocket on March 11, 2002, 09:15:10 PM