Print Page - Penton and misc,parts

Title: Penton and misc,parts
Post by: fischercycle on March 13, 2002, 11:49:32 AM

LOTS OF NEW SPROCKETS FOR LATER MDL. 76 TO WHAT EVER 428 CHAIN TYPE,, SIDE PANELS FOR SAME YEARS, NEW FRONT WHEELES FOR 125CC 175CC, CHAIN GAURDS BLACK ,AIR BOOTS ,FORK PARTS,COUNTER SPOCKETS,GAS CAPS, HAND LEVERS,FRAMES,CABLES, GASKETS ,LOTS OF SMALL ENGINE PARTS, ENGINE BLOCKS 125 TO 400 all new oem parts [email protected] or call 412 781 6309 724 586 7383 Jake

Title: Penton and misc,parts
Post by: Bryan on March 15, 2002, 01:04:28 PM

I've got two bikes that I am looking for parts to restore them here is what I'm looking for. Clutch side crankcase for a '76 250cc Penton/KTM. The other bike I have is a '78 400cc KTM and I am looking for side panels for it both bikes are motocross. Do you all have these parts and how much are they? Thanks.

Bryan

Title: Penton and misc,parts
Post by: tmc3c on March 15, 2002, 05:59:07 PM

I've tried several times to reach you without much sucess.You must be a busy man.How about a fork slider leg for my 76 250 marzocchi w/leading front axle. I need the side with the 2 allen bolt's.How much? by chance do you have fiberglass air box cover?

Thomas Carmichael

Title: Penton and misc,parts
Post by: tmc3c on March 16, 2002, 05:09:37 AM

Bryan H&H ktm in Douglasville G.A. has plastic side cover's for your bike's . If I cant find a fiberglass airbox cover that's what I am going to do.Call Barry Higgins there at[770]920-1371

Thomas Carmichael

Title: Penton and misc,parts
Post by: fzrr750 on March 16, 2002, 04:14:08 PM

Jake, got any white rear fenders that will work on my 79 KTM 250MX? Know of a universal one that will work on this narrow frame and seat? I have been looking for over 3 months for a rear fender. I bought an Acerbis universal front and it fits like it was ment to be on it.
I do not want the one with the number plates build in. Just the short MX type!! Used would be fine if it looks new!!

Thanks for your time. Ed T.

Title: Penton and misc,parts
Post by: tmc3c on March 16, 2002, 04:25:36 PM

Thanks for the call jake!The fork's are gray, one side dosen't have any allen hd. bolt's only the axle nut. the other side has 2 small allen's holding the axle. I would guess as a backup. I work 3rd shift and I'll try and catch you mon. I also will have the fork tube size for you.Thank's again.

Thomas Carmichael

Title: Penton and misc,parts
Post by: Dr.2Stroke on March 17, 2002, 08:51:56 PM

i have a new and about 10 used left side crank case clutch covers,and new original airbox side covers for the 76 250. Dr.2stroke

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: fischercycle on March 13, 2002, 11:49:32 AM