Print Page - 73 Jackpiner Petcocks

Title: 73 Jackpiner Petcocks
Post by: Keith Meatyard on November 30, 2010, 08:58:33 PM

Hi all. Anybody got any of the little plastic screens that screw into the base of the petcock as shown in the photo below? The threads measure approx 6mm in diameter. One of mine crumbled into pieces. I also need the little plastic tube.

Thanks,
Keith
(http://i923.photobucket.com/albums/ad77/Meatyard_photos/Penton%20Project%202010/Petcocks.jpg)

Keith Meatyard

Title: 73 Jackpiner Petcocks
Post by: tofriedel on December 01, 2010, 09:13:31 AM

Keith,

AL B may be able to assist. I had a few spare petcocks that I used for parts, but they are all gone at present.

Tony

Title: 73 Jackpiner Petcocks
Post by: gooddirt on December 01, 2010, 02:45:49 PM

I have them, will call tonight. LG

Title: 73 Jackpiner Petcocks
Post by: clayman on December 01, 2010, 10:56:57 PM

LG,

Are you in Calif.? I tried to call you a couple of times but no answer.You should come up for flat track on Dec. 11th. Mark, Chris, Britt, we will be there. I'll call you Saturday. Have to talked to Mickey lately?

Clay

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Keith Meatyard on November 30, 2010, 08:58:33 PM