Puch motor, complete minus ignition. Doesn't turn over. Rescued from the scrapper. Pics available, 125 cc I believe.
I've been dis-assemblig this and it has a 63mm bore, and the crank does turn. Will keep at getting the piston out. There is a crack in the left case at the shift shaft area.
Have you tried Coke? I have been told that it will work wonders
Thom Green,Still crazy after all these years!
76' 250 MC5 (orginal owner)
74'250 hare scrambler (project)
74' 1/2 440 maico
78' 440 maico
72' cr125 Husky (project)
74' TM125 suzuki
93' RMx 250 suzuki
I got it apart, Coke wouldn't have worked, I had an open exhaust port. Some heat and PB Blaster and the press and the piston slid out.Cases are broke, {welded a couple of times.} Cylinder is junk also. Have a decent head and all the mounting hardware. Intake manifold with the fiber spacer. For a 175 motor. Let me know if you need these. My screen name @ yahoo.com thx
Most of it has been sold. Some to the USA, some going to Italy.