Text only | Text with Images

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Kurt Adams on February 28, 2011, 09:32:00 PM

Title: Sprocket holding tool
Post by: Kurt Adams on February 28, 2011, 09:32:00 PM
Could one of you fine fellows tell me what you are using to hold the sprocket while tightening the nut?  I don't have the correct tool, and I certainly don't want to break something as a result.

Any pictures of the tool would help if you have one.

Thanks guys.
-Kurt

'73 Berkshire
Title: Sprocket holding tool
Post by: joe novak on February 28, 2011, 10:17:12 PM
The back wheel....
Title: Sprocket holding tool
Post by: Kip Kern on March 01, 2011, 06:59:07 AM
Whatever size chain on a metal handle.  Wrap around the CS sprocket and torque nut to 50 ft lbs.  Just like the factory tool but home made!
428/520/530 :D
Title: Sprocket holding tool
Post by: Kurt Adams on March 01, 2011, 05:40:32 PM
Ok, thanks!  Wasn't sure if it was a big deal or not.  Guess I'm overly cautious![:o)]

'73 Berkshire
Text only | Text with Images