Anyone have a large shaft from a Marz shock. I need one to make up a good set...that is if anyone has found seals. Rod, found any seals?
Thanks
Mike
Mike
I have had the seals and shaft wipers reproduced,just got another order in last week. I do not have any shafts, very hard to come by.
Rod
Mike,
I have a pair of 12mm Marzocchis on a 77 175 MC5 and one of the shocks have the top housing broken. I will have to check when I get back home from working out of town on Thursday, but I think they have good shafts. I would let the broken one go cheap if it has a good shaft. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR250
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R & CR150R
Michael
I am always interested in Marzocchi shocks and parts. Do you want to sell the one good shock? I will buy them both if Mike doesn't want them.
thanks
Rod G
Rod,
I thought about buying the single shock that provenancevmx has for sale on eBay for $49.95 plus shipping to make a pair, but I will let you know after I get home and inspect the shafts. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR250
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R & CR150R
that single shock on ebay looks like a buy
Took the other shock apart and it has bad pretty bad pitting on the shaft, so now it looks like I need two shafts! Mike I wiuld be interested in your broken one.
Mike L
Don't throw the old shafts away, could be used for a restoration rebuild only or maybe getting them rechromed.
Rod
Mike,
I just finished setting up our band, Midnight Special, for a gig this Saturday night, which is the Shriners benefit night here in Newton. I looked at the shocks before coming inside and they look OK, but I just glanced at them and will remove them tomorrow and fully assess their condition. Mike[8D]
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR250
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R & CR150R
Mike,
I left a message on your voice mail to call me 618-553-1346 about the Marzocchi shocks, I have them off and inspected. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR250
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R & CR150R
Rod,
One shaft is bent. I will send you the other one so you can maybe use it someday.
Thanks Mike, do you have my address yet?
Rod
Mike Lenz,
Check your AOL email. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR250
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R & CR150R
Hi guys...some years ago when I was rebuilding a 74 250..I purchased a set of "rebuild kits" to suit Marzocchi shocks ....got new shafts seals etc..when they arrived they were bigger than the shafts in the shocks I had...so..I think approx I had 10 or 12mm shafts and the new ones were 13 or 14 ish ..not sure...anyway ...I have two complete shocks (dis-assembled) but would require some mods to get the damper tubes etc to work with the new shafts I have....Have no use for them now anyone interested...Oh..they are in Australia
Mike Lenz,
Do you still want these shocks, or should I offer them to Rod? PayPal invoice sent to your AOL email on Sunday, per our phone conversation. Thanks, Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR250
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R & CR150R