Would someone with a 76 and a 77 parts book for the 175 Jackpine , pass along the Parts #s for the cylinders and heads offered in the manuals. I would like to know if only one cylinder was made and used on both the mx and enduro version. The same info is needed for the heads for both years. I believe that both the 76 and 77 cylinders were the 6 fin for the short piston 175 configuration.
Thanks
John
Edited by - John Durrill on 04/12/2002 7:19:18 PM
Send me $10.00 and I will copy both the mx and enduro manuels for you. Or I can just look up the cyl and head info. Let me kmow at
[email protected].
Here in europe they didnt sell a 175 MC or MX in 1976 and 1977.due to my parts manuals(original from KTM) there was a 7 rims cylinder,which has the "old"form as it was built since 1971. This cylinder needs also the long piston. I have also seen on complete bikes this cylinder. i have a 77 175 enduro,and this model has already the newer form of the cyl. on it. it has only 6 rims,and they are not as straight as the 76. it also needs another type of piston,which is available until 65mm bore.regards dr.2Stroke