I have way too many engine parts, and no bikes to use them on. Transmission gears, shafts, clutch hubs, springs, screws, and bronze plates,a 400-three boost port cylinder, 400 heads, early 400 crank halves(without the weight rings), clutch covers,... I won't give it all away to one person, don't want it just ending up on ebay!, let me know what you need, I will look, you just pay my shipping cost. I am in San Francisco.
JP I will take Transmission gears,clutch hubs, springs,plates. I rebuild motors so they won't go on ebay. Give me a call Later Gary Ellis 217 260 0237
Gary is a very credible engine builder and does so at a very resonable price. It would benefit a lot of us for him to have access to these items. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR250 & OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R
hi jp. thanks for this offer. i could certainly use the 400 cylinder, head and crank halves. i'm rebuilding some motors too. none of it would go to ebay. also, i'll be sending you another email in regards to the 175 motor issues that we discussed earlier.
chicago jerry 440 213 5146
Please note: No 175 specific parts in my pile of stuff, thanks, JP.
Hey JP, I am looking for the shaft the shifter goes on. It would be for my 76 250 MC5. I am also building a couple 250 motors to have in stock, so any clutch or outside cases that Gary isn't buying. Thanks, James
1976 MC 5 Original Owner
1982 Suzuki PE 175
1976 Husqvarna 175GP
2002 KTM 200 EXC
2007 KTM 250 XCF
1981 KTM 250 (Project)
James, I am sure I have a shift shaft, I will check to make sure the splines are good. Please call my shop, 415 822-1315, so we can make sure you get the correct other parts, and I can get your shipping address. JP
JP, I would be interested in the case halfs and a set og 400 clutch plates. I will call you.