Print Page - Ceriani Fork Legs

Title: Ceriani Fork Legs
Post by: desmond197 on October 06, 2011, 09:07:48 AM

I need a pair of Ceriani fork sliders for a Steel tanker. I have a good set of tubes just need the sliders with the tab for the front brake.

Title: Ceriani Fork Legs
Post by: G Ellis on October 06, 2011, 11:52:39 AM

There is a set on ebay 149.00. Not a bad price. Later Gary

Title: Ceriani Fork Legs
Post by: MikeMurphy on October 06, 2011, 07:15:44 PM

I have a NOS pair of Ceriani sliders still in the box, never been
opened. I think they are for 35mm from the notes on the box. You can email me a picture and I will see if they are the same.They are from a old school vintage dealer inventory we just purchased.

Mike

[email protected]

Michael Murphy
1976 250 MC-5
Many Rokons
[email protected]

Title: Ceriani Fork Legs
Post by: desmond197 on October 06, 2011, 09:20:37 PM

Mike do they have the tab for the front brake on them?

Title: Ceriani Fork Legs
Post by: MikeMurphy on October 07, 2011, 02:08:29 AM

I will find out today for you.

Michael Murphy
1976 250 MC-5
Many Rokons
[email protected]

Title: Ceriani Fork Legs
Post by: OUCWBOY on October 07, 2011, 12:05:26 PM

Also, keep in mind that some sliders (legs), even though they may be the correct size, ie 35mm, there are different lengths as well.

Donny Smith
Paragould, AR

Title: Ceriani Fork Legs
Post by: MikeMurphy on October 07, 2011, 04:17:05 PM

I have taken pictures of the sliders, if you email me, I can
send them to you. I found 2 pair, both the same. They look to be
model C-1000, they have the tabs,15 inches long,and have fork wipers. I will slide one of my betor tubes in and see if they
are 35mm.

Michael Murphy
1976 250 MC-5
Many Rokons
[email protected]

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: desmond197 on October 06, 2011, 09:07:48 AM