Print Page - OT: Wanted Rickman bearings

Title: OT: Wanted Rickman bearings
Post by: Ernie Phillips on October 21, 2011, 06:01:18 PM

Trying to help a buddy: Need 2 sprocket carrier bearings for Rickman Zundapp 125 brg # 7H180204C5
any help to find these much appreciated.

Ernie P.
Chattanooga, TN

Title: OT: Wanted Rickman bearings
Post by: sixdazed on October 21, 2011, 08:45:56 PM

Ernie,Try Matt at Speed and Sport-(530)878-0700.If he doesn't have them i bet he can tell you who does.Later,
Ric

Title: OT: Wanted Rickman bearings
Post by: Kip Kern on October 21, 2011, 09:24:04 PM

They should cross over to a normal bearing at any bearing jobber if you can't get them from Matt. All you need is a caliper size.

Title: OT: Wanted Rickman bearings
Post by: Ernie Phillips on October 23, 2011, 08:40:17 AM

Matt no got.

20x46x15 (IDxODxW) bearing jobber, no luck so far.

Ernie P.
Chattanooga, TN

Title: OT: Wanted Rickman bearings
Post by: Paul Danik on October 23, 2011, 09:55:26 AM

Ernie,

Try these folks.

http://www.applied.com/

They have pretty much always come through when an item was hard to source. If you don't find what you need in their online catalog give them a call, sometimes they are able to source some of the hard to find sizes as special order. Hope this helps.

Paul

Title: OT: Wanted Rickman bearings
Post by: Greg Elliott on October 23, 2011, 03:58:31 PM

I can also use these for my 125 Rickman project.can you please post where to buy? I also have some parts for sale for the 125. Thanks, Greg

Title: OT: Wanted Rickman bearings
Post by: BrianTaylor on October 25, 2011, 12:31:16 PM

Since its from the UK it could be an RLS 6 2rs..... your measurements are slightly off RLS6 is .750 id 1.875 od and .5625 on the width...hope that helps .....BT ( 37 years with Canadian Bearings )[:0]

Brian Taylor

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Ernie Phillips on October 21, 2011, 06:01:18 PM