Text only | Text with Images

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: olebmw on November 28, 2011, 12:45:21 PM

Title: Sachs Boondocker 80cc
Post by: olebmw on November 28, 2011, 12:45:21 PM
I need the right side engine cover for a 1967 Sachs Boondocker 80cc. The # inside the cover should be 0211 127 200. I also need a flywheel and magneto parts,exhaust and an original headlight. I havn't looked inside the engine so I will probably need some internal parts. Anything out there? Thanks, Dan
Title: Sachs Boondocker 80cc
Post by: gooddirt on November 28, 2011, 02:12:05 PM
I should have what you need ,need to find the right box.
Title: Sachs Boondocker 80cc
Post by: olebmw on November 28, 2011, 08:23:15 PM
Sounds good,keep looking.I could use a better cylinder also.If anyone is interested I have a right engine cover #0211 127 399 to trade for the one I need. It is very close to the one I need, but about 1/8" larger along the bottom Thanks,Dan
Title: Sachs Boondocker 80cc
Post by: gooddirt on December 04, 2011, 03:53:34 PM
(http://i408.photobucket.com/albums/pp170/ktmgs/SachsK-80-GS.jpg)
Title: Sachs Boondocker 80cc
Post by: checkcrew on December 04, 2011, 06:25:34 PM
Larry,

  cool brochure,
the address on the bottom is about 7 miles from my house,

Mike Gallagher, NJ.
[email protected]
Title: Sachs Boondocker 80cc
Post by: olebmw on December 19, 2011, 07:52:01 PM
Do anyone have a steel rear fender [like the one in the brochure gooddirt posted] for sale. Mine appears to be chopped off several inches. A chrome plated one would be ok.
Title: Sachs Boondocker 80cc
Post by: gooddirt on December 19, 2011, 09:41:40 PM
Dan I found the rear hub and wheel parts and got the pics shot.
Text only | Text with Images