I am posting this bike for a friend. If interested, please contact Hugh at
[email protected]Thanks
Marc
(http://i1003.photobucket.com/albums/af151/oldyamaha/hpe.jpg)
(http://i1003.photobucket.com/albums/af151/oldyamaha/hp.jpg)
(http://i1003.photobucket.com/albums/af151/oldyamaha/hpento.jpg)
(http://i1003.photobucket.com/albums/af151/oldyamaha/hpent.jpg)
(http://i1003.photobucket.com/albums/af151/oldyamaha/hpen.jpg)
100 or 125 motor ?
Hey Larry, I need an exhaust manifold for a Jackpiner 72/73 black 7 fin cylinder. I'm not sure if the later ones will work or not. I did a search on this site and it seems that there are some differences in the pipes from year to year? Did you get the PVL done yet?
Yes I have one. Nightmare and a half on the pvl its a early digital with no specs, was told to use the anti clock-wise mark but turns out it was not the mark. Told to set it at 1 to 1.2 btdc but found old pog post which says thats for modern bikes specs; posting said 2.2 to 2.6 So I went with 2.0 for the stuffed cases /milled flat to the first fin on the head GS Pro motor.