Print Page - Front Wheel Spacer Width

Title: Front Wheel Spacer Width
Post by: KJDonovan on February 18, 2012, 03:02:25 PM

I am pulling together a 74 Six Day and I am missing a spacer on the front wheel that goes between the brake hub and the fork tube. In the parts list I have the part number is 51.09.085.000. Does anyone know what the length of this should be? I need to make one up and I am guessing about a ¼ inch, but would rather not guess.

Thanks,

Kevin

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
73 Yamaha AT3
71 Suzuki TS125 (Project)

Title: Front Wheel Spacer Width
Post by: Lew Mayer on February 18, 2012, 06:56:15 PM

I make mine, sized to center the wheel in the forks. Hope this helps.

Lew Mayer

Title: Front Wheel Spacer Width
Post by: KJDonovan on February 18, 2012, 07:26:06 PM

Thanks Lew, When I shimmed it out with washers to center the wheel, I came up with a 1/4" so I will probably go with that.

Thanks,

KD

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
73 Yamaha AT3
71 Suzuki TS125 (Project)

Title: Front Wheel Spacer Width
Post by: Tom Murphy on February 19, 2012, 08:01:16 AM

Just measured one, call it 1/4". Tom

Penton Owners Group

General Discussion => Penton Talk => Topic started by: KJDonovan on February 18, 2012, 03:02:25 PM