Print Page - Rear Wheel Spacer

Title: Rear Wheel Spacer
Post by: Lee Brown on April 28, 2012, 05:50:01 PM

Hey Poggers does anybody know the length of the aluminum spacer that mounts between swingarm and rear wheel on a MC5 the one I have is 1-7/8 is this the correct one any help would be great

x

Title: Rear Wheel Spacer
Post by: tomale on April 29, 2012, 05:15:39 PM

I have a couple of them im my collection, I will go check out and check it a little later tonight. birthday party to go in a few minutes. By the way, all the ones I have seen are steel not aluminum...If I had a choice I would use an aluminum spacer.

Thom Green,Still crazy after all these years!
76' 250 MC5 (orginal owner)
74'250 hare scrambler (project)
74' 1/2 440 maico
78' 440 maico
72' cr125 Husky (project)
93' RMx 250 suzuki

Title: Rear Wheel Spacer
Post by: tomale on April 30, 2012, 01:10:31 PM

I pulled the one off my 76 MC 5 and it is 1 13/16 in length. It is the stock one that came on this bike. I know because I am the only owner of this bike.

Thom Green,Still crazy after all these years!
76' 250 MC5 (orginal owner)
74'250 hare scrambler (project)
74' 1/2 440 maico
78' 440 maico
72' cr125 Husky (project)
93' RMx 250 suzuki

Title: Rear Wheel Spacer
Post by: Lee Brown on May 02, 2012, 11:20:51 AM

Thx for help I thought they were all the same size.......

x

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Lee Brown on April 28, 2012, 05:50:01 PM