1977 Penton/KTM 175 GS-6 Enduro in mostly original condition, requiring a complete restoration. I have remocvd the head and cylinder and there is slight surface rust on the cylinder requiring boring oversize and probably a rod kit due to slight rust on the top rod boss from storage, but bottom of crank looks rebuildable and rotates easily. The front engine mount case area looks like JB weld or an ugly weld repair has been done and needs cleaned up. Entire bike needs restoration, but it has some nice condition desirable items like the small GS-6 tank and pipe with a Super Trapp type silencer. I am asking $500.00 which is $100.00 less than I have in it including transportation and since I don't have the time to put into restoring it and I don't want to part it out. I can deliver within a 500 mile radius for gas money. Email for additional pics Thanks, Mike Newton IL. 62448
I have this listed on Marks Swap meet page also.
Listing cancelled
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R
Mike
Send me some photos, I almost have the jackpiner finished! Kip;)
Pics and descriptions sent. I may have to deliver a bike to the Detroit area very soon, so I might have the chance to drop by if you are interested. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R
Thanks Mike! Will look brand new in about 6 months!:D
I can't wait to see it like new again! Good to see it in your capable hands. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R
Anyone out there have a NOS left side cover and 14mm Kick Starter shaft for the 77 GS 175? Thanks in advance!;)
Kip,
Did you get my message on needing the lengths of the brake and engine strut, etc? Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R
Sure did Mike, as soon as I get my parts manual, I will have descriptions and part numbers, thanks!
I have new a cover with shelf ware .
Larry If you want to get rid of it, send photo with price to
[email protected].
Thanks
Need correct side stand for this project and a good 35mm Zoke Mag rt lower fork leg (pinch bolt area cracked on this one) Also a 36mm Lectron carb and correct air boot to airbox.:D Thanks!
Salvaged the Lectron carb with Al Buehners help, need a proper side stand and air boot from carb to airbox. Thanks for all the help!
Kip,
There are air boots for 125/175 on eBay item #110797183885.
Dave McC
Dave,
This bike has a stock Lectron carb. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R
The side case cover is for 17mm shaft , I have side stands is it any longer than most. I have a set of 35mm cherry annie leading axle maganizzee 8 or 9 inch travel off a penton orange legs.
Thanks Larry, found a correct swingarm for the centerstand so don't need a side stand now. Dave, the air boot is quite different than the ones offered on Ebay but thanks for the thought! Coming along nicely!
Anyone out there have the correct centerstand for a 77/78 GS6 175? Roberto is checking Italy. Thanks in advance!;)