Penton Owners Group

General Discussion => Penton Talk => Topic started by: brian kirby on August 31, 2012, 12:39:31 PM

Title: 38mm Lectron jetting
Post by: brian kirby on August 31, 2012, 12:39:31 PM
Anybody know a good ballpark jetting for a 38mm Lectron on a 400?

Brian
Title: 38mm Lectron jetting
Post by: G Ellis on August 31, 2012, 09:00:29 PM
6.1 needle. Iwill call you in the morning. Later Gary
Title: 38mm Lectron jetting
Post by: adrian_goold on September 14, 2015, 03:41:52 AM
Has anyone got any further information on this?
Is this using a non-powerjet carb?
Has anyone got some specs for both the 250 and 400 using powerjet carbs?

Regards,
Adrian
Title: 38mm Lectron jetting
Post by: ALB on September 16, 2015, 02:43:18 PM
According to my Lectron application chart this is what the Lectron non-power jet carbs should be:

KTM 125 GS - 32mm  #4 needle
KTM 125 mx - 34mm  #4 needle
KTM 175 GS - 34mm  #5
KTM 175 mx - 34mm  #5
KTM 250 GS - 36mm  #4-1
KTM 250 mx - 38mm  #4-1
KTM 400 GS - 38mm  #6-1
KTM 400 MX - 38mm  #6-2


Alan Buehner
Title: 38mm Lectron jetting
Post by: adrian_goold on September 17, 2015, 06:47:24 AM
Thanks Al!

Regards,
Adrian Goold #101
http://www.ozktm.com
(http://i1089.photobucket.com/albums/i342/ozktm/1974%20KTM%20250%20Penton/1BB79418-1F02-412C-9EF5-67C029A9A961-1733-000002851414FCA5.jpg)[/URL]
'73 175 Rebuilt|2x'74.5 250 |'74.5 400 Restoring|2 x'76 MC5 250 |'76 MC5 400 |'78 250 in pieces|'81 250 | '81 495|74 CZ 250|