Print Page - Steel Tanker rims

Title: Steel Tanker rims
Post by: Fred Deagostino on November 16, 2012, 08:49:31 AM

Gents, I'm down to my last question on the steel tanker project survey and am not sure which of the alloy rims I have here on v416.
They are quite flat on the sides (beads) and quite flat on top except for a raised curve in the center for the spokes.
The survey asks for either Borrani or MZ (?). 'Not sure which I have. Any clues? Fred

OneMoreTime

Title: Steel Tanker rims
Post by: Kip Kern on November 16, 2012, 08:52:14 AM

If they are Borrani, they would be identified somewhere on the outer rim (stamped). If no ID, then most likely they are MZ as MZ only Ink stamped them on the inside where the rim strip laid.

Title: Steel Tanker rims
Post by: Fred Deagostino on November 16, 2012, 09:17:05 AM

Thanks Kip, look's like they're MZ then. I'll get my survey out this AM.

OneMoreTime

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Fred Deagostino on November 16, 2012, 08:49:31 AM