Print Page - Rear spokes

Title: Rear spokes
Post by: imported_n/a on May 27, 2002, 01:58:08 PM

I'm trying to replace 2 sprocket side spokes on my '73 250 HS. There is a plate that covers the spoke ends inside the rear brake. I've removed both circlip's, but I am unable to remove the plate. The manual does not describe this and I am trying not to break the plate. Any help would be appreciated.

Thanks,

George

Title: Rear spokes
Post by: imported_n/a on May 28, 2002, 05:25:02 PM

I figured it out. The plate will pop right out with a little persuasion. Some compressed air did it for me.

Penton Owners Group

General Discussion => Penton Talk => Topic started by: imported_n/a on May 27, 2002, 01:58:08 PM