I am looking for a 18" Akront shouldered rim that is in reasonable condition, no cracks or major flat spots, surface can need work/polishing.
Thanks
Mike Berrington
Waynesboro VA.
73 Jackpiner, 77 GS6 175
mini Jackpiner, mini GS6
07 KTM 200w, 09 KTM 300w,
72 CZ 380, 74 TY250(2), GT80,
77 IT175, 80 CR125, 81 YZ250,
81 yz125 (2) 88 YZ250
What hole count do you need for the rim, 36 or 40? I have several 40 hole rims that are in good shape.
Rod
Oops sorry, 36 count on the spokes.
Mike Berrington
Waynesboro VA.
73 Jackpiner, 77 GS6 175
mini Jackpiner, mini GS6
07 KTM 200w, 09 KTM 300w,
72 CZ 380, 74 TY250(2), GT80,
77 IT175, 80 CR125, 81 YZ250,
81 yz125 (2) 88 YZ250
I have a 40 spoke but no 36, sorry. I am however, looking for a nice "round" 40 hole sun rim 3" total width. Thanks
Mike
I don't have any 36 hole shouldered Akronts.
Kip
I probably have a good Sun rim, when you say 3", do you mean outside of flange to outside of flange?
Rod
Mike, check out item #290838432626 on EBay..... James
Rod
Correct, outside measurements WM3 rim , Thanks!
Kip
I will look and let you know.
Kip
How nice of rim do you need? I have a pair of NOS Hi-Point Sun rims and several used Sun rears. How good of one do you need? I really don't want to split the set of NOS rims up.
Rod
Rod
It doesn't have to be NOS but I am looking for a nice used rim for a restoration. No deep gouges, ham fisted tire iron marks and no flat spots would be greatly appreciated. :)
Kip
I went through the Sun rims today and I don't have anything that is not gouged or scratched. Let me know if you want one of them and I will send it to you.
Rod
I have a set of shouldered rims that I got from Waldridge a few years ago. I never used them, front is 21 x 1.6 36 hole. Rear is 1.85 x 18 36TS.
Neither was ever even laced up. I would sell as a pair $275 plus shipping.
[email protected]
Thanks for checking Rod, Semper Fi!