Print Page - looking for carb bushing

Title: looking for carb bushing
Post by: imported_n/a on June 01, 2002, 12:18:11 PM

Does anyone have a rubber carb bushing for a 125 Six-Day to fit the stock 27mm Bing, or a suitable substitute? The part number for the bushing is 51.06.029.000. Thanks. Glenn

Title: looking for carb bushing
Post by: imported_n/a on June 11, 2002, 08:44:27 AM

I guess this must be one of those impossible to find items.
Is there a suggestion for a substitute material, such as a certain size of hose or some other material? Any suggestions of successful workarounds would be appreciated.
Glenn

Title: looking for carb bushing
Post by: Chris Brown on June 11, 2002, 04:02:56 PM

I think we're not sure what you mean by a "bushing". If you're talking about the carb to intake spigot, you can use green-line fuel hose, like for a truck or marine gas tank. Your local auto parts jobber will have it.
If you're talking about the boot for the carb to airbox, Al has those repro.
Chris

Title: looking for carb bushing
Post by: imported_n/a on June 11, 2002, 06:02:06 PM

Chris, I'm talking about the plastic piece that slides on the airbox side of the carb that the boot from the airbox clamps onto.
Glenn

Title: looking for carb bushing
Post by: LINDEMAN on June 13, 2002, 12:35:26 AM

Glen,I know the bushing you need and may have one.It will take a few days and I will let you know.Dave

Title: looking for carb bushing
Post by: imported_n/a on June 13, 2002, 09:25:40 AM

Thanks.

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: imported_n/a on June 01, 2002, 12:18:11 PM