Print Page - Wanted: Sachs cylinder and side covers

Title: Wanted: Sachs cylinder and side covers
Post by: Marc Biro on January 31, 2013, 08:42:00 PM

I'm rebuilding a Sachs motor out of a 1973 Six Days and looking for a nice cylinder, and both side covers. Covers need to say "Sachs".

Thanks

Marc

Title: Wanted: Sachs cylinder and side covers
Post by: OUCWBOY on January 31, 2013, 10:11:41 PM

Marc,
I will look to see what I have this week end and will let you know!

Donny Smith
Paragould, AR

Title: Wanted: Sachs cylinder and side covers
Post by: Marc Biro on February 01, 2013, 12:34:14 PM

Thanks Donny!

Marc

Title: Wanted: Sachs cylinder and side covers
Post by: OUCWBOY on February 01, 2013, 09:46:34 PM

No Problem!

Donny Smith
Paragould, AR

Title: Wanted: Sachs cylinder and side covers
Post by: OUCWBOY on February 03, 2013, 12:11:46 PM

Marc,
I do not have any usable cylinders that don't have broken fins. Some are cut for the steel tanker. All my clutch cover cases are cracked. I DO have a very good ignition cover, which are actually harder to find than the clutch side. Shoot me your mailing address and I will get it to you.

Donny Smith
Paragould, AR

Title: Wanted: Sachs cylinder and side covers
Post by: firstturn on February 03, 2013, 12:37:51 PM

Marc,
I think know where there is a rod kit. Send me a email and I will try and get the details unless you have already found one.

Ron Carbaugh

Title: Wanted: Sachs cylinder and side covers
Post by: joe novak on February 04, 2013, 12:22:19 PM

Ron, I also need a steel rod kit for a Sachs. Are they available, and for what price? Thanks, joe

Title: Wanted: Sachs cylinder and side covers
Post by: Guenther68 on February 06, 2013, 07:36:09 AM

Hi Joe,

take one of these. They're as excellent as the F&S originals for Sachs 1251/6B with around 90 mm crankshaft (not fitting the old crankshafts with 107 mm diameter). You might have to remove a litte bit material (around 0,5 - 1 mm) from the engine housing. Otherwise the conrod could touch the housing.

http://www.ebay.de/itm/SACHS-125-2t-BIELLA-SPECIALE-ALTI-REGIMI-/290852935140?pt=Ricambi_e_Accessori_Moto&hash=item43b82f95e4#ht_1134wt_1164

I have one of these in my Hercules GS and it works great.
(http://up.picr.de/11771895ew.jpg)

Best regards
Guenther Vogt,
Hercules Club, Germany

******************************
Hercules-Interessengemeinschaft e.V.
URL: http://www.herculesig.de

******************************

Title: Wanted: Sachs cylinder and side covers
Post by: johnborn on February 09, 2013, 12:36:15 PM

I have a clutch cover,if you still need one.

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Marc Biro on January 31, 2013, 08:42:00 PM