Penton Owners Group

I have a PVL ignition and I want to take the lights off the bike for MX. Does the ignition need something drawing from it or will I be ok without lights?

Thx

74 puch 175 SD
73 Husky 360 WR/RT
76 Husky WR360
75 Penton 250
10 ktm 250xc
02 bmw r1150r

Dale,

Just unplug the lights, it will be fine.

Thanks,

Kevin

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
71 Suzuki TS125
72 Montesa Cota 123

Thanks Kevin, Thats what I thought. Just wanted to make sure

74 puch 175 SD
73 Husky 360 WR/RT
76 Husky WR360
75 Penton 250
10 ktm 250xc
02 bmw r1150r

Dale,

I was thinking about this after the fact, you said you had a "PVL" with lighting?  Did you mean "MZB"? I was not aware that PVL's had lighting coils.

Thanks,

Kevin

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
71 Suzuki TS125
72 Montesa Cota 123

PVL doesnt have a lighting coil, must be an MZ-B or now its called Powerdynamo.

Brian

Sorry, yes, it must be an MZB.

74 puch 175 SD
73 Husky 360 WR/RT
76 Husky WR360
75 Penton 250
10 ktm 250xc
02 bmw r1150r

Hi Dale, just be sure the 2 black wires from stator do not touch each other, or any ground. There is always AC voltage at these wires when engine is running.Your ignition will be fine with the black wires disconnected and insulated.
  Jerry Birky