Print Page - 27mm Bing 53

Title: 27mm Bing 53
Post by: Steve Minor on April 30, 2013, 06:12:50 PM

Ok....got a 27mm Bing 53 on a 72 Six Day. It's a new project bike. The carb has a seperate cable operated choke plunger on the side, meaning it's not inside the body next to the slide. My questions are: (1)with the cable slack and the plunger in the down position, is the choke on or off? and (2)Is the seal material for the bottom of the plunger still available?

Thanks

Steve Minor
Wilmington, NC

Title: 27mm Bing 53
Post by: 400gs6 on April 30, 2013, 08:12:23 PM

Yes,with the cable slack and the plunger down, the choke is off. As far as the sealing material, I'd call the Bing Agency for a new replacement plunger.

Kurt

Title: 27mm Bing 53
Post by: Steve Minor on April 30, 2013, 08:40:51 PM

Thanks Kurt....just what I needed to know.

Steve Minor
Wilmington, NC

Title: 27mm Bing 53
Post by: rob w on April 30, 2013, 09:39:15 PM

http://www.ebay.com/itm/BING-53-NOS-Carb-Starter-Plunger-Choke-Sachs-Tempo-Hercules-Monark-Husqvarna-/120914249455?pt=Motorcycles_Parts_Accessories&hash=item1c270d06ef&vxp=mtr

Title: 27mm Bing 53
Post by: gooddirt on April 30, 2013, 09:55:05 PM

I use blue or back RTV silicone, what kind of shape is 45 year old seal material [?] I have had them push out of the plunnger.

Title: 27mm Bing 53
Post by: Steve Minor on April 30, 2013, 09:57:50 PM

Thanks Baub.....I'll get right on it. Now, any lead on a replacement choke cable?

Steve Minor
Wilmington, NC

Title: 27mm Bing 53
Post by: gooddirt on April 30, 2013, 10:06:39 PM

A good place to test it out is at a race event.:D

Title: 27mm Bing 53
Post by: rob w on April 30, 2013, 10:27:24 PM

Steve, A choke cable is just a throttle cable with a end cut off.
Wait, I guess that depends on the type of choke lever you're using.

Title: 27mm Bing 53
Post by: seanguthrie on May 01, 2013, 01:01:31 PM

I had some contact with Bing before my trip to Texas.
http://www.bingcarburetor.com/

They have pretty much everything you could need for your carb. Just call or email them and they'll hook you up. I was in a time crunch waiting on money to order parts and get the bike done for Diamond Don's. They were very friendly and parts arrived in 2 days.

74 250 Hare scramble
73 CMF 6day
68 6day V213

Title: 27mm Bing 53
Post by: Steve Minor on May 06, 2013, 05:41:31 PM

Kudos to POG Member Tom G and GenuineNOS parts. I was able to get NOS choke plunger parts at a very fair price....Try them out sometime.

Steve Minor
Wilmington, NC

Title: 27mm Bing 53
Post by: Steve Minor on May 07, 2013, 08:06:35 PM

Ok.....got a fuel delivery problem. My Six Day motor loads up and blubbers. And the air boot gets drenched with gas.

Think the float isn't shutting off?

Steve Minor
Wilmington, NC

Title: 27mm Bing 53
Post by: firstturn on May 07, 2013, 08:26:04 PM

Steve,
Just got in at the end of this thread. Probably a good place to start. Shoot me an email if I need to help as I will be traveling this week and next.

Ron Carbaugh

Title: 27mm Bing 53
Post by: gooddirt on May 07, 2013, 09:50:51 PM

you have the spring installed above the new plugger ? and the choke is off. you can check to see if the plugger is sealing ; pull it out and you should have two indent circles

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Steve Minor on April 30, 2013, 06:12:50 PM