Hi there,
I don't have any engine stays for my MC5 project.
Would anyone have a set that is surplus to their needs, and willing to sell and send to me in Oz?
Any help is appreciated.
(http://i1089.photobucket.com/albums/i342/ozktm/76%20MC5%20400/481A94C1-6485-4AB0-8840-27E33B296C00-6176-000008CCEACA6891_zps5f266158.jpg)
Thanks in advance,
Regards,
Adrian Goold #101
http://www.ozktm.com
(http://a3.l3-images.myspacecdn.com/images02/142/fe1e34e644f240d797527a8b19182548/l.jpg)
'73 175 Rebuilt|'74.5 250 Rebuilt|'74.5 400 Restoring|'76 MC5 250 Restoring|'76 MC5 400 Restoring|'78 250 in pieces|'81 250 Now Racing| '81 495 Now Racing|'84 125 Selling|'07 KTM 300| 74 CZ 250|74 CR250M x2|
Hi Adrian
Send me an e-mail with the eye to eye measurement of both engine stays. I will look around in my parts to see if I have any to fit.
Alan Buehner
...if not, I'm certain to have some.
I sent Al the lengths, but could you please email me some pics of what you have?
Thanks,
Adrian
Regards,
Adrian Goold #101
http://www.ozktm.com
(http://a3.l3-images.myspacecdn.com/images02/142/fe1e34e644f240d797527a8b19182548/l.jpg)
'73 175 Rebuilt|'74.5 250 Rebuilt|'74.5 400 Restoring|'76 MC5 250 Restoring|'76 MC5 400 Restoring|'78 250 in pieces|'81 250 Now Racing| '81 495 Now Racing|'84 125 Selling|'07 KTM 300| 74 CZ 250|74 CR250M x2|
Left side (at bottom of picture), 189 mm center to center
Right side (upper two in picture), 221 mm center to center. Two styles shown, I believe the curved one (on the lower end) may be more correct.
(http://i52.photobucket.com/albums/g8/BobWardlow/brace004_zps4a63a064.jpg)
I'm leaving in the morning, and gone for 6 days to Road America to help "crew" for this race car.
(http://i52.photobucket.com/albums/g8/BobWardlow/cougar14_zps303f27ae.jpg)
WOW been a long time since I've seen a Cougar like that!!
Donny Smith
Paragould, AR