Text only | Text with Images

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Lew Mayer on May 19, 2013, 10:42:26 AM

Title: Flywheel clearance
Post by: Lew Mayer on May 19, 2013, 10:42:26 AM
Has anyone experienced clearance problems with the heavy (enduro) flywheel rubbing the inside of the cover?

Lew Mayer
Title: Flywheel clearance
Post by: gooddirt on May 19, 2013, 06:48:16 PM
I had one rub the other way on the stator; found it was do in part to a ; too thick of a after- market gasket under the stator base.
Title: Flywheel clearance
Post by: G Ellis on May 19, 2013, 09:56:41 PM
Lew on what Bike?
Title: Flywheel clearance
Post by: Kip Kern on May 20, 2013, 07:28:38 AM
I have never had a problem but it is a close fit for sure!
Title: Flywheel clearance
Post by: Lew Mayer on May 20, 2013, 08:14:52 AM
Gary, a '76 250.

Lew Mayer
Title: Flywheel clearance
Post by: Kip Kern on May 20, 2013, 01:41:35 PM
Mine is on a "76" GS 400
Title: Flywheel clearance
Post by: G Ellis on May 21, 2013, 11:59:19 PM
Lew that fly wheel is for a 400. Never used it on a 250. Just take some cork material and make a gasket.
Title: Flywheel clearance
Post by: Lew Mayer on May 22, 2013, 07:55:34 AM
A dremel tool worked too.;)

Lew Mayer
Text only | Text with Images