Anyone have a decent Amal 22mm carb for a Penton Mudlark? I have a carb body and bowl, but it is missing the slide, needle and top. It also has extensive corrosion. I would rather replace it with a nicer unit.
Also need the aluminum heat shield for the muffler.
Lastly, I could use an original seat base / seat. Will consider any condition.
Matt at Speed and Sport has carb parts, but no heat shield or seat.
Thanks in advance.
Shane
270-779-5070
[email protected]
Shane,
Is the carb you are looking for flange or spigot mount? I think I have an extra 25MM Amal 625 flange mount. If yours is flange mount measure the center to center on the bolt holes in the flange.
Thanks,
Kevin
Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
71 Suzuki TS125
72 Montesa Cota 123
Kevin,
Thanks for the offer, but I think I have it handled at this point. With a little help from the bead blast cabinet and new parts from Speed and Sport, its should be back together in a week or so. It looked worse than it was.
Many thanks to Paul Danik for the muffler heat shield!
I could still use a seat base, but have something that will work in the meantime.
Thanks
Shane