Print Page - Speed pipe and porting spec's

Title: Speed pipe and porting spec's
Post by: john durrill on June 18, 2002, 01:37:44 PM

Folks,
Al Buehner sent me two pages with the instructions and diagrams on how to produce a Carl cylinder and pipe for the 250 Penton.
I got the scanned and uploaded to the files section on the Vinduro web site for a few days. anyone interested should try and down load them as soon as possible as space is limited and i have to remove the files quickly. Port maps with all measurements and instruction are included as well as a pipe diagram and all measurements. this is the web address of the group http://groups.yahoo.com/group/vinduro/
You will need to join to access the files section but its free and easy to do.
Hope this will help,
John D.

Title: Speed pipe and porting spec's
Post by: Richard on June 21, 2002, 09:59:12 PM

John,

I looked for the porting specs but could not fine them, if they have been deleted could you re-post them?

thanks, Richard

Title: Speed pipe and porting spec's
Post by: john durrill on June 23, 2002, 08:37:07 PM

Richard ,
can't do a repost due to a lack of space on the Vinduro group board. but i can e-mail them to you.
They are big files and eat up 2.1 meg of space in your mail box.
Maybe Doug or some one in the POG web Masters corner could get the group some space to file articles like this .
John

Title: Speed pipe and porting spec's
Post by: Richard on June 23, 2002, 08:59:47 PM

John,

E-mail would be great! Send the files to [email protected]. Thanks a lot!

Richard

Title: Speed pipe and porting spec's
Post by: john durrill on June 24, 2002, 07:32:43 AM

Richard , they should be in your mail box now. hope they help.
John D.

Title: Speed pipe and porting spec's
Post by: bigdanracer on June 26, 2002, 07:25:16 PM

Does anyone have the porting specs for my 77 400 MC-5.
Thanks, Dan

Posting 02/2002
Corona CA.
Age 48, maintenance mechanic, two 77 Pentons, 250,400 MC-5s. Like snow skiing, golf, riding and racing. Used to own a mountain bike manufacturing buisness, built downhill, cross country and slolam race bikes.

Title: Speed pipe and porting spec's
Post by: Richard on June 26, 2002, 09:35:32 PM

John.

Thanks for sending the porting and pipe specs. It did take a while to down load, but I am pleased to have them.

Richard

Title: Speed pipe and porting spec's
Post by: tmc3c on June 27, 2002, 06:44:19 AM

John, Please help!! Could you or Richard please pass on that info to me too. I hate to be the last one getting on the wagon,but I am resto a 76 GS with a 74 motor from ground up and I have been asking how to get these mods made on the pog forum's with no luck .If you can do this for me my e-mail is [email protected] Thank You in advance for your time and trouble!! p.s.I tried to go through Yahoo but had no luck

Thomas Carmichael

Title: Speed pipe and porting spec's
Post by: john durrill on June 27, 2002, 10:41:42 AM

Thomas,
they should be in your mail box now
John D.

Title: Speed pipe and porting spec's
Post by: tmc3c on June 28, 2002, 06:56:22 AM

John, I really appreciate your time and trouble! I know that this could snow ball.But as of 6:51a.m.est on the 28th I have not recived them. Maybe they will show up.I sure hope so ,this is a valued bit of info that I will be using !! If you have time again could you check and see if the e-mail went through from your end? Thanks

Thomas Carmichael

Title: Speed pipe and porting spec's
Post by: john durrill on June 28, 2002, 09:53:40 AM

Thomas ,
am sending it again.
E-Mail me at [email protected]
so i know i have your adress right and make sure you have enough room in your mail box.

Title: Speed pipe and porting spec's
Post by: Mike Lenz on June 30, 2002, 09:41:53 PM

Im interested in finding someone to do the porting since its so extensive??

Title: Speed pipe and porting spec's
Post by: tmc3c on July 01, 2002, 09:52:47 PM

HEY JOHN, DID YOU RECIVE MY E-MAIL?

Thomas Carmichael

Title: Speed pipe and porting spec's
Post by: john durrill on July 01, 2002, 11:08:42 PM

Yes Tom ,
i resent the files, and sent you a message to make sure you got them,
JOhn

Title: Speed pipe and porting spec's
Post by: tmc3c on July 03, 2002, 05:30:51 PM

Thanks John YOU ARE THE MAN!!

Thomas Carmichael

Penton Owners Group

General Discussion => Penton Talk => Topic started by: john durrill on June 18, 2002, 01:37:44 PM