Print Page - Penton Wassell Sachs stuff I can bring to M-O

Title: Penton Wassell Sachs stuff I can bring to M-O
Post by: Dennis Jones on July 16, 2013, 11:41:56 AM

Here are a few things I've been holding on to that I've decided to sell and can bring to M-O. I am riding with a friend so I won't bring along anything that is not spoke for.

Wassell Trials/Tyran front wheel with backing plate, brake arm and brake shoes. This will clean up real nice (I've started with a lot worse)
$75 SOLD
(http://i870.photobucket.com/albums/ab270/kanur/P1000633_zps9f249e58.jpg)

Wassell Trials right foot peg mount, peg and brake pedal.
$15 SOLD
(http://i870.photobucket.com/albums/ab270/kanur/P1000634_zpsf6f2dcf5.jpg)

NOS Wassell Trials Control Cables. These are NOS in original Wassell box's
4 clutch cables $25 each 4 SOLD
1 front brake cable $25 SOLD
1 rear brake cable (you won't find another one of these) $50 SOLD
(http://i870.photobucket.com/albums/ab270/kanur/P1000627_zps8c45ca76.jpg)

1 Wassell Trials Muffler, no heat shield. Is pitted but solid and has been bead blasted and painted.
$35 SOLD
(http://i870.photobucket.com/albums/ab270/kanur/P1000630_zps891b1943.jpg)

2 Sachs Full Fin Heads for alloy barrels as used on the trials and steel tank bikes or they work great if you want to use a down pipe VGC
$25 each 2 SOLD
(http://i870.photobucket.com/albums/ab270/kanur/P1000631_zps17e311a5.jpg)

1 Bosch Ignition, Flywheel and coil for Sachs 100 & 125 motors VGC
$75 SOLD
(http://i870.photobucket.com/albums/ab270/kanur/P1000629_zps8b5d0ac8.jpg)

Full Size engine side cases (clutch & ignition) as used on early 175 and 250 ktm motors. These are kinda hard to find. The clutch side has a repair you can see from the inside but works fine, I ran it a lot of years. Bead blasted and painted.
$25 each
(http://i870.photobucket.com/albums/ab270/kanur/P1000635_zps1d8916ec.jpg)

Used but very good H & H side covers for CMF bikes. These are the nice shiny slick white ones. 1 left and 1 right.
$20 ea SOLD
(http://i870.photobucket.com/albums/ab270/kanur/P1000636_zpsd9bf7985.jpg)

Black CMF front hub & backing plate, no cracks. It's actually a whole wheel with a nice shoulderless alloy rim but the rim has a small crack.
$20

Black conical rear wheel with shoulderless alloy rim for 74 and up CMF
KTM motored bikes
$25

Open to offers, first (I'll Take It) gets it.
five73 27five 721zero

Dennis Jones

Title: Penton Wassell Sachs stuff I can bring to M-O
Post by: firstturn on July 16, 2013, 12:08:43 PM

Dennis I will take the Muffler. Thanks.

Ron Carbaugh

Title: Penton Wassell Sachs stuff I can bring to M-O
Post by: Dale Fisher on July 16, 2013, 03:36:41 PM

Dennis,
One of the clutch, the front and rear brake cables for me if they are not spoken for yet.

Dale Fisher
Penton Owners Group - Memberships
Facebook - Cheney Twinshock Racing Group - Administrator

'70 Six-Day 125 - V2017
'71 Six-Day 125 (Dave Fisher's) - V5553
'72 Mudlark - W257
'73 Jackpiner - 175 21159727
'74 Berkshire 100 - 40171056
And some silly other bikes...

Title: Penton Wassell Sachs stuff I can bring to M-O
Post by: Dennis Jones on July 16, 2013, 03:45:05 PM

They are yours Dale

Dennis Jones

Title: Penton Wassell Sachs stuff I can bring to M-O
Post by: iyaoyas on July 17, 2013, 08:07:58 PM

Hi Dennis-

I could use the remaining clutch cable (and brake cables if you find more).

Hope we can connect while at VMD this weekend.

Thanks-
Stephen Markley

Title: Penton Wassell Sachs stuff I can bring to M-O
Post by: Lew Mayer on July 17, 2013, 09:20:32 PM

Drink some beer for me while you're up there, Dennis.

Lew Mayer

Title: Penton Wassell Sachs stuff I can bring to M-O
Post by: Dennis Jones on July 18, 2013, 09:10:00 AM

Will do Lew ;)

Stephen, look for me around the POG area on Saturday or call the # I have posted above.

Dennis Jones

Title: Penton Wassell Sachs stuff I can bring to M-O
Post by: rpage11 on July 19, 2013, 12:58:13 AM

Dennis
Can I get the right foot peg and brake pedal from you. Thanks Skip

All I really need is the brake pedal, if anyone else needs the rest.

Skip Page
Tucson, AZ
//www.robertpagearchitect.com

Title: Penton Wassell Sachs stuff I can bring to M-O
Post by: hotrod392 on July 19, 2013, 10:29:31 PM

If anyone else has a Wassell brake pedal and rear brake cable (in any condition), I could also use one.

Thanks
Shane
[email protected]

Title: Penton Wassell Sachs stuff I can bring to M-O
Post by: Dennis Jones on July 22, 2013, 12:28:29 PM

Shane, there is a usable rear cable in the box of stuff I'm sending you.

Dennis Jones

Title: Penton Wassell Sachs stuff I can bring to M-O
Post by: Michael Thompson on July 22, 2013, 02:56:48 PM

Dennis once again it was a pleasure to meet you at VMD.

2003 KTM 300exc
1997.5 KTM 200 "Jackpine"
1983 KTM 495
1983 YAMAHA IT250
1984 YAMAHA IT200
1992 Yamaha WR200
1986 HONDA Z50 My first bike
Hope to add a PENTON soon!

Title: Penton Wassell Sachs stuff I can bring to M-O
Post by: hotrod392 on July 22, 2013, 04:59:51 PM

Thanks Dennis. If all else fails, I can fabricate the brake pedal.
I really appreciate the parts and hope you (and everyone else) enjoyed mid Ohio. I sure wished I was there...

Shane

Title: Penton Wassell Sachs stuff I can bring to M-O
Post by: Dennis Jones on July 23, 2013, 11:45:41 AM

Mike,it was a pleasure to hang out with you and your Dad

You're gonna have to change your sig line now that you own a Penton.

Dennis Jones

Title: Penton Wassell Sachs stuff I can bring to M-O
Post by: 3putt on July 23, 2013, 05:10:11 PM

Shane, I have a rear brake pedal, foot pegs, and rear brake cable if you still have a need for any of these. W Nelson McCullough

Title: Penton Wassell Sachs stuff I can bring to M-O
Post by: hotrod392 on July 23, 2013, 06:07:46 PM

Sounds great Nelson. I will e-mail you offline.
Thanks
Shane

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Dennis Jones on July 16, 2013, 11:41:56 AM