Print Page - Ceriani lower fork legs

Title: Ceriani lower fork legs
Post by: MikeMurphy on September 23, 2013, 11:35:07 AM

Did Ceriani make early lower legs to fit 34mm & 35mm?
I have 2 sets of NOS lower legs and a 35mm tube fits real
tight and only goes in about 2 inches. I don't want to sell them as 35mm and be wrong.The seals are 35 x 47 x 10 are were installed at the factory so I know they are correct. But the 35mm tube that
I am using to test is a "BETOR".

Michael Murphy
1976 250 MC-5
Many Rokons
[email protected]

Title: Ceriani lower fork legs
Post by: firstturn on September 23, 2013, 12:13:37 PM

Mike,
I will PM you.

Ron Carbaugh

Title: Ceriani lower fork legs
Post by: 454MRW on September 23, 2013, 02:31:39 PM

Ron,
Even though it appears to be working when sending a PM, I don't believe that Karen has been able to get that feature working, and at last report, there seems to be no easy fix. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R

Title: Ceriani lower fork legs
Post by: firstturn on September 23, 2013, 08:01:53 PM

Thanks Mike I sent (the other Mike) Mike an email.

Ron Carbaugh

Penton Owners Group

General Discussion => Penton Talk => Topic started by: MikeMurphy on September 23, 2013, 11:35:07 AM