Wanted 77 MC5 frame or parts bike. please email me at slakewell at bigpond.com
I have one, but need to keep the wheels for another project bike, but shipping would be expensive unless you are having other items shipped by container on a ship. I can take some pics and email you tomorrow.
**Pics of a chassis and a bare frame sent** Mike Winter
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R
Mike.. I have a 77 frame without swingarm, front wheel, complete brand new clutch and possibly a few more parts, if interested shoot me an email
[email protected]
Slakewell, What's your apx location ?
He's in Australia. I have shipped smaller items to him before. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R
Thanks for the replies guys.
I'm in Australia so yes I can be difficult to ship to.
Also looking for some 76/77 400 engine cases.
Have some good cond '77 Marzocchi 35mm forks and clamps, $60?
Also a pair of red leg 38mm Marzocchi forks from an '81.
Jon
[email protected]
Quotequote:Originally posted by Big Mac
Have some good cond '77 Marzocchi 35mm forks and clamps, $60?
Also a pair of red leg 38mm Marzocchi forks from an '81.
Jon
[email protected]
I would be interested in your 38mm Marzocchi forks if available. Sent an email and it was bounced. Doug. ten_rounder yahoo com
I have a '78 swingarm and have no idea if it would fit a 77 even if you wanted it. $50 plus shipping. If you pursue this it might be sensible to pick a single consolidation point in the US where as much as possible can be collected without charge.
I have some other miscelleaneous parts from a '77 (apparently though still up in the air a very late '77) and a few parts from a '78.
I have a complete, functional engine from a '77 with about 12-15 hours on it the only rub is that it is installed in a '74 at the moment and my '74 engine needs to be swapped back into its original frame.
Seems too complcated but if you want to discuss I am happy to do so.
Yes a "78" swingarm will fit a "77" frame. Shock mounts on the "78" are about 1" more forward than the "77". Other than that, they are identical.
I sent pics of a rolling chassis, with the info that I want to keep the wheels, but Mike hasn't gotten back to me. It may be that the shipping is detrimental. Does anyone have a recommendation on how to ship a package the size of a frame, approximately 36" x 32" x 14" to Australia that doesn't cost $500 or more? Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R
Mike, I bought a frame about a year ago, and all the seller did, was to wrap the frame in plastic wrap. He charged me $40 to get it across the country.....
Quotequote:Originally posted by kip kern
Yes a "78" swingarm will fit a "77" frame. Shock mounts on the "78" are about 1" more forward than the "77". Other than that, they are identical.
1976 MC 5 Original Owner
1976 Hercules 250 GS 7A
1982 Suzuki PE 175
1976 Penton 175 GS
Shipping to Australia is not cheap for that big of a package. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R
Shipping to Australia is not cheap for that big of a package. Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R