Any of you guys have a tip on a brand and supplier of some rear shocks that would have chrome springs with OD of about 40mm for my Bultaco Sherpa T? The originals were much skinnier than typical cross country bikes. Original shocks on the Wassels look in the pics to be about the same OD. I assume trials shocks didn't have to be as beefy. So far, all of the manufacturers I've checked with all have spring OD's at least 50mm.
Keith Meatyard
The following came as a Facebook post. I'm sure there are other options available. You might call Matt at Speed and Sport, Check or send an email to the Sammie Miller website in the UK, or call one of the Hagon distributors such as Dave Quinn.
Works produces this shock as shown where clearance is required. This is a gas shock with separator piston. As pictured these shocks retail for $455/pr. This configuration would work great for the customer going for the OEM look but improved.
(http://i957.photobucket.com/albums/ae59/CheneySachs/267249_2015865556350_262608_n_zpsfbaa22f2.jpg)
Dale Fisher
Penton Owners Group - Memberships
Facebook - Cheney Twinshock Racing Group - Administrator
'70 Six-Day 125 - V2017
'71 Six-Day 125 (Dave Fisher's) - V5553
'72 Mudlark - W257
'73 Jackpiner - 175 21159727
'74 Berkshire 100 - 40171056
And some silly other bikes...
Check InMotion Bultaco in England also, they are great to deal with, ship fast and have tons of stuff.
The springs for Progressive Suspension 14 series shocks are 39mm ID.
Brian
Hugh's -- the betors should fit your sherpa t or call them and they will absolutely know what will work and is available stateside.
http://bultaco.com/betor-shocks.html
Those Betors will look similar when the bodies are painted silver. The length is right, and the adjuster at the bottom looks similar to the original adjusters. Another candidate is the slimline chrome spring SS road shock by Hagon, again if painted silver. It doesn't look like outside diameters under 50mm are made by anyone.
Thanks for the tips,
Keith Meatyard