I've been looking for a top triple clamp for my 81 GS250, without much luck. The other day I was on Evil bay and saw several Can-Am clamps from the early '80's. They appeared to be the similar Marzocchi design as the KTMs, although the Can-Am's use tapered bearing as opposed to the ball bearings on the GS. I know there is a whole host of other factors to consider but with manufacturing budgets the way they are perhaps the clamps would interchange with KTM's?
Pete Petrick
175 Jackpiner
Slow but Good
I have a set of 1980 38mm KTM Marzocchi triple clamps if they are the same.
[email protected] Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R
Yes mine are 38mm too, stand by.
Pete Petrick
175 Jackpiner
Slow but Good