Print Page - Leading axle Ceriani forks

Title: Leading axle Ceriani forks
Post by: Bill Campbell on March 13, 2014, 06:41:38 AM

Just purchased some leading axle Cherries for my 76 400 project. One of the forks is leaking from between the bottom metal hex nut? and the fork body. Does this nut? unscrew to reveal an O ring that needs replacing. Would like some advice before I give a go. Cheers Bill

Title: Leading axle Ceriani forks
Post by: KJDonovan on March 13, 2014, 07:22:10 AM

Bill,

Yes the nut does un-screw and there is an o-ring that can be replaced. The photo below shows the 2 plugs that insert into the sliders under the large nut style cap on the bottom of each slider.

[image]http://i621.photobucket.com/albums/tt298/KJDonovan/KLavoie034.jpg[/image]

Thanks,

Kevin

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
71 Suzuki TS125
72 Montesa Cota 123
72 Montesa Cota 123T (Another Project)

Title: Leading axle Ceriani forks
Post by: Bill Campbell on March 14, 2014, 03:39:06 AM

Thank you very much Kevin. Photo stored for reference. Cheers Bill

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Bill Campbell on March 13, 2014, 06:41:38 AM