Print Page - Pipe Rubbers

Title: Pipe Rubbers
Post by: imported_n/a on July 10, 2002, 05:27:11 PM

Does anybody have any sources for pipe rubber mounts? Al B. doesn't have any, and I'm looking for a couple.

Glenn

Title: Pipe Rubbers
Post by: Steve Minor on July 10, 2002, 09:01:02 PM

Try to get a Grainger's catalog.....seems like I heard they have something very close...or try Larry Perkins.....

Title: Pipe Rubbers
Post by: rob w on July 11, 2002, 12:14:44 AM

Glenn, I was looking at those today in the W.W. Grainger catalog, They are 1" O.D. and 1" long , female thread on one side and male on the other, I think they were 5/16-18 threads. You still need a asbestos (huh?) washer or like, if you want to, e-mail me your address, and I can get some to you, I wanted to check em' out anyway.

Title: Pipe Rubbers
Post by: imported_n/a on July 11, 2002, 08:51:51 AM

Thanks, Bob. My mailing address is on its way to you.

Again, great to visit with you last Saturday!

Glenn

Title: Pipe Rubbers
Post by: imported_n/a on July 11, 2002, 08:54:10 AM

Steve, thanks for the info.
When I asked Al B. if he had any, he kind of laughed. Not a good sign. So I thought I would ask the collective braintrust of POG for info. As always, your help is greatly appreciated.

Glenn

Title: Pipe Rubbers
Post by: Steve Minor on July 11, 2002, 10:11:47 AM

Rob.....if you'll tell the section of the Grainger catalog the "exhaust rubbers" are located, I'll order some for 2 projects I have going on. It would be a great help...

Thanks
Steve

Title: Pipe Rubbers
Post by: metalkfab on July 11, 2002, 06:21:47 PM

McMaster-Carr catalog #108 also carries them as vibration control mounts.They offer them with metric threads(just retap the female threads before install-they come with rubber in the threads that won't let you tighten them properly).Cost is approx. $2.00 each.

Title: Pipe Rubbers
Post by: Steve Minor on July 11, 2002, 08:13:35 PM

Thanks.......as always POG members have come through with valuable information...

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: imported_n/a on July 10, 2002, 05:27:11 PM