Needing an upper fork leg for a 35mm ribbed Ceriani with good chrome(no flaking or pitting). If I have to would take a whole fork but just need the upper chrome part. Thanks for your consideration.
Does no one have anything to help on this? Would take complete leg or a set of 35mm Cerianis even the non-ribbed ones on a complete set. Not the steel tanker kind though. Thanks for any help here!
Larry, I have some 35mm stuff, I will look through it and let you know.
Rod
Thanks Rod! You can reach me at
[email protected] Will help me setup a project.
The one I am looking for is 23.25"
I have a bent and a tad bent. And a weld on folding shifter tip a hi-point.
Thanks Larry but I found a shifter and need a good fork leg unbent.
Read in a old keeping track that the early 8in would bend easy and penton stopped using them . 80% of forks I have had maybe 100 pairs from all makes of bikes seem to all have a slight bend on them.
Quotequote:Originally posted by gooddirt
Read in a old keeping track that the early 8in would bend easy and penton stopped using them . 80% of forks I have had maybe 100 pairs from all makes of bikes seem to all have a slight bend on them.
Gooddirt,
Sorry, can't resist the opportunity to poke some fun. Maybe it's time for a new straight edge [:0]
Dale Fisher
Penton Owners Group - Memberships
Facebook - Cheney Twinshock Racing Group - Administrator
'70 Six-Day 125 - V2017
'71 Six-Day 125 (Dave Fisher's) - V5553
'72 Mudlark - W257
'73 Jackpiner - 175 21159727
'74 Berkshire 100 - 40171056
And some silly other bikes...
They are easily straightened.