Text only | Text with Images

Penton Owners Group

General Discussion => Penton Talk => Topic started by: selyab on August 19, 2014, 09:36:02 AM

Title: No fuses
Post by: selyab on August 19, 2014, 09:36:02 AM
Isn't there a good chance of cooking your electrical systems since there are not fuses in the circuits?  How is the motoplat protected?
Title: No fuses
Post by: Kip Kern on August 19, 2014, 12:39:06 PM
Ignition Cover:D
Title: No fuses
Post by: brian kirby on August 19, 2014, 03:29:19 PM
The bulbs are the fuses.

Brian
Title: No fuses
Post by: selyab on August 19, 2014, 10:37:41 PM
:DYes the bulbs are fuses but the frame is a very big ground!!
Title: No fuses
Post by: Kip Kern on August 20, 2014, 09:15:48 AM
Seriously though, I use 12v bulbs in all mine and have never had an electrical issue with a Bosch, PVL, MZB or Motoplat
Title: No fuses
Post by: Rain Man on August 25, 2014, 06:20:35 PM
That kill switch shorts the ignition out and stops the electricity from being produced, (engine stops) not like house current...   Which never stops.  Sorta...
6volts usually has minimal current,  and it can sit on ground forever. The CNC machines I goof with all the time would freak the average sparktrologist out. The stories I could tell...

Raymond
 Down East Pentons
Text only | Text with Images