Text only | Text with Images

Penton Owners Group

General Discussion => Penton Talk => Topic started by: BrianTaylor on August 27, 2014, 12:57:18 PM

Title: 6B Kickstarter Stop Screw
Post by: BrianTaylor on August 27, 2014, 12:57:18 PM
What tool does everyone use to remove or tighten the kickstart stop screw  ( you know the one in the bottom of the engine you are not to remove ) .. thks BT

Brian Taylor
Title: 6B Kickstarter Stop Screw
Post by: firstturn on August 27, 2014, 01:25:13 PM
Great question Brian.  Al may have the correct tool (socket).  But the fact that I have seen people loosen this with just a normal set of sockets leads me to believe you can probably loosen it with a socket....just skewed at a angle?  If not call Al or I will see if I have a spare.

Ron Carbaugh
Title: 6B Kickstarter Stop Screw
Post by: Kip Kern on August 27, 2014, 01:30:21 PM
I use the Sachs tool
Title: 6B Kickstarter Stop Screw
Post by: BrianTaylor on August 27, 2014, 03:16:51 PM
Is there a special tool from Sachs [:0]  ????  got a picture of it ?.... Of the 15 or so motors I have done I always struggle with  a 17mm socket but it just isnt correct ... BT

Brian Taylor
Title: 6B Kickstarter Stop Screw
Post by: Rocket on August 27, 2014, 10:27:05 PM
Check out item #191296358299 on Ebay, I think that is what you need.
Title: 6B Kickstarter Stop Screw
Post by: BrianTaylor on August 28, 2014, 09:20:02 AM
Yes I think that is the tool but for the cost ( by the time I get to Canada ) I think I will try to make something ...  Thks for all the replies .. Brian

Brian Taylor
Title: 6B Kickstarter Stop Screw
Post by: gooddirt on August 28, 2014, 02:21:57 PM
I take them out all the time with a socket...  OCD ?  lol
Text only | Text with Images