Print Page - Wanted 32mm Bing Have a 30 for trade ??

Title: Wanted 32mm Bing Have a 30 for trade ??
Post by: t20sl on December 05, 2014, 08:25:46 PM

Would like to find a 32mm Bing to swop or buy. Needs to be style without choke on side of carb. The 30 is also without outside choke. 32mm is for a PUCH 175
Thanks, Ted

Title: Wanted 32mm Bing Have a 30 for trade ??
Post by: 454MRW on December 13, 2014, 06:09:20 PM

I don't need a 30mm carb, but is this carb like the one you need? The slide has wear marks, and if you look closely, there is a crack at the base where the bowl mates up to the carb body below the fuel inlet, but I don't think it extends past the lip, plus it is missing the tickler assy. The inside is clean looking. Mike
[email protected]
(http://i232.photobucket.com/albums/ee220/454MRW/Bing32mmcarb-1_zps7c308da6.jpg) (http://s232.photobucket.com/user/454MRW/media/Bing32mmcarb-1_zps7c308da6.jpg.html)
(http://i232.photobucket.com/albums/ee220/454MRW/Bing32mmcarb-2_zps3832866d.jpg) (http://s232.photobucket.com/user/454MRW/media/Bing32mmcarb-2_zps3832866d.jpg.html)
(http://i232.photobucket.com/albums/ee220/454MRW/Bing32mmmcarb-3_zps2eeede9b.jpg) (http://s232.photobucket.com/user/454MRW/media/Bing32mmmcarb-3_zps2eeede9b.jpg.html)
(http://i232.photobucket.com/albums/ee220/454MRW/Bing32mmcarb-4_zps438e505a.jpg) (http://s232.photobucket.com/user/454MRW/media/Bing32mmcarb-4_zps438e505a.jpg.html)
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R

Title: Wanted 32mm Bing Have a 30 for trade ??
Post by: t20sl on December 13, 2014, 08:09:00 PM

No the one I need is a clamp on style. Yours is for Bultaco / Ossa with Spanish numbering system. One needed would be 1/32/10? Thanks though,

Title: Wanted 32mm Bing Have a 30 for trade ??
Post by: 454MRW on December 14, 2014, 04:53:53 AM

I am not even sure where this came from, as I have never owned a Bultaco, Ossa, or Montesa, so if anyone can use this, make me an offer. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R

Title: Wanted 32mm Bing Have a 30 for trade ??
Post by: t20sl on December 14, 2014, 08:24:55 AM

Mike:
There is one on Ebay with M110008 and it is said to be from a Montesa 250cc King Scorpion.
Looks identical except has a bolt on fuel inlet.
Ted

Title: Wanted 32mm Bing Have a 30 for trade ??
Post by: gooddirt on December 16, 2014, 08:29:28 PM

I have a few Bing 84's 32 mm very good shape but non clamp.

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: t20sl on December 05, 2014, 08:25:46 PM